Author Archives: reliancetechno

Temperature transmitter installation at Power Plant

Reliance Technology and Service recently installed a few Temperature Transmitters, at a 9.9 MW Biomass Power Plant. The Temperature Transmitters had a probe length of 2.5 m and was installed in a Furnace (with temperature approx. 600-650 Deg C). Our scope included the design, installation, wiring and connection to the plant’s existing control system (DCS).

Installation / commissioning of Temperature and Level monitoring system at Rice Mill

During November 17-18 November 2016, Reliance Technology and Service supplied / installed /commissioned Temperature & Level monitoring system at a Rice Mill. The system consisted of 20 sets EST120 sensors (temp. and level combined) installed in Rice silos/ bins. The results are monitored and controlled, via our intelligent software, in their control room. Our level […]

Pressurized System in Gas Insulated Switchgear (GIS) Sub-stations

Reliance Technology and Service installed Pressurized System in Gas Insulated Switchgear (GIS) Sub-stations (nos. 4 and 5). This was at PTT Chem (PTTCH) site in Map Ta Phut, Rayong during early 2010. Our scope included the design, calculation, equipments supply (blower, duct work, shutter, damper controller and control panels), installation and commissioning of the system. […]

Power Plant site investigation

Reliance Technology and Service (RTS) conducts site surveys, revamps, retrofit jobs of field/ process instruments (Pressure, Temperature, Flow and Level) and on-site calibration and loop test. Recently we conducted a site investigation and data collection of all instruments at a 9.9 MW power plant. For this project we supplied, installed and calibrated all the Pressure/ […]

Technical seminar at Thai Cold Rolled Sheet Mill

Reliance Technology and Service (RTS) conducted a technical seminar for Thai Cold Rolled Steel Sheet Mill (TCRSS) during April 2016. The seminar lasted 2 full days and was very informative and useful to the managers/ engineers who had attended. Subject : Orifice metering of natural gas and other related hydrocarbon fluids (AGA Report No. 3).